20090715
Manouvers
20090713
Carlotta 1937
As work progressed there was some difficulty in getting Lloyd's to perform a scheduled survey of the boat going together. The Cumberland Sea Fishery wanted someone to report frequently on the progress of the yard and the task was given to a Mr.E Brinkworth - a retired Pilot who worked as the Dockmaster in Gloucester. On November 15, 1899 the boat was launched and Christened The Solway. It measured 50' long on deck, 13' beam, 8' draft and 28 Tons.
20090706
Tall Ships - Lady Washington and Moon (aka Interceptor from Pirates of the Caribbean)
Tall Ships - Lady Washington and Moon (aka Interceptor from Pirates of the Caribbean)
Originally uploaded by Darvin Atkeson
her. She was docked at Humphries Restaurant on
the Sacramento River Delta in Antioch. Humphries was named for the whale
that swam up the delta. The food isn't bad but is a tad expensive for what
it is. The restaurant does have a good view of the Delta.
The ship is a remake of the original Lady Washington which was a 90 ton
merchant sloop which sailed around Cape Horn. This replica was built in
1989 and is the official ship of Washington state. If you have a mind to
you can sign on to her crew for up to several months. From what I hear, you
pay some and you have to carry your weight or walk the plank. Some
vacation. Much shorter tours of duty are also available to those willing
to try their hand at an old profession. And if you want for around $50 you
can take a 3 hour tour. We got to go down in her hull and I was shocked by
the cramped spaces. She wasn't much bigger inside than a small RV but then
we didn't get to see the whole ship. This version does have a contemporary
motor. She was also used in the Star Trek Generations movie at the
beginning of the movie. Both movies make her look much larger than she
really is. No matter, she is more graceful on the water than many ships.
She often sails with the Hawaiian Chieftain up and down the Pacific Coast.
You can view her schedule at www.ladywashington.org
-Darv
LiquidMoonlight.com
© Darvin Atkeson
20090701
Shamrock
Although there were five versions of Shamrock (numbered I through V), Johnston only lived long enough to photograph the first Shamrock, now referred to as Shamrock I. Indeed, it was during the 1899 America's Cup race between Shamrock and Columbia that Johnston reportedly caught the cold which led to his death.
(Note that there was another yacht named Shamrock - according to the August 1896 issue of Outing magazine, there was a Shamrock owned by W. P. Ward. Does anyone know anything about this vessel?)
| Type | Gaff-rigged cutter |
|---|---|
| Class | 1883 Seawanhaka 90' Rule |
| Design | William Fife, Jr. (1898) |
| Shipyard | J. Thorneycroft & Co. |
| Dimensions | LOA 38.86m LWL 25.12m Beam 7.46m Draught 6.15m |
| Displacement | 156.9 metric tonnes |
| Rig | Lower-Mast 29.56m Top-Mast 18.90m Boom 32.61m Bowsprit 8.60m Sail Area 1214.30m² |
Shamrock was the unsuccessful Irish challenger for the 10th America's Cup in 1899 to the US defender, Columbia. Shamrock was designed by William Fife III, Jr. and built in 1898 by Builder: J. Thorneycroft & Co, at Millwall on the Thames near London, England for owner Sir Thomas Lipton (of Lipton Tea Fame).
According to Americascup.com :
"Shamrock I is launched on June 24, 1899 and christened by Lady Russell of Killowen. Its build has been shrouded by secrecy and its hull is hidden by canvas, as was the case forThistle, in 1887. The 1895 challenger Valkyrie III is refitted to be sailed as a trial horse for Shamrock I. Soon after its launch, Shamrock I races against the Prince of Wales' yacht,Britannia. The Irish challenger outpaces the royal yacht in two regattas on the Solent. Shamrock I arrives in New York on August 18, 1899, and sails daily to train the crew for the Cup races.
"During the second [cup] race, on the first windward leg, Shamrock's topmast snaps and the challenger withdraws. The same evening a new spar is fitted. The Irishmen add four tonnes of ballast, so the yacht is re-measured on October 18, but its sailing performance is not improved. The Irish yacht's Steel mast is too bendy. During the 1899 yachting season, the boat goes through six sets of sails.
"On November 2, 1899, Shamrock I leaves New York and is towed back to Great Britain by Lipton's steam yacht, Erin, via the Azores. It is dry-docked on arrival. [In] 1901Shamrock I is refitted by Lipton and sails as a trial horse for his new challenger, Shamrock II, a George L. Watson design. [In April] 1903, Shamrock I is refitted again and sails as a trial horse for
Shamrock III. On May 28, 1903, with 41 crewmen onboard, Shamrock I sails to New York and races against Shamrock III before the Cup. After the Cup, Lipton tries to sell his two yachts, without success. [In] 1914 Shamrock I sails against Shamrock IV off Cowes before Lipton's fourth challenger sails across the Atlantic.
"Yacht club: Royal Ulster Yacht Club, Ireland
Sailmaker: Ratsey, Cowes
Skipper: Captain Archibald "Archie" Hogarth and his assistant, Captain Robert "Bob" Wringe
Afterguard: Jesse Connell and Captain Ben Parker "
During its trials it raced against the 1895 America's Cup challenger, Valkyrie III, as well as twice beating His Majesty's Yacht Britannia in regattas on the Solent. It sailed to New York for the America's Cup race in the summer of 1899. The Cup defender Columbia beat Shamrock in all three races. It returned to Britain in the autumn of 1899, towed by Lipton's steam yacht, Erin. It was subsequently refitted by Lipton and used as a "trial horse" to test the later challengers, Shamrock II, III, and IV.
20090629
Defender
Defender as photographed by John S. Johnston on July 20, 1895, six weeks before the 1895 America's Cup.
Defender defeated the New York Yacht Club's Vigilant then went on to defend the cup against British keel cutter Valkyrie III. Following the contest, Defender was towed to New Rochelle where it remained for another four years without sailing. It was rebuilt to race trials against the 1899 America's Cup defense candidate, Columbia. Defender was broken up in 1901.
Length at water line: 27.17m
Beam (width): 7.03m
Draft: 5.81m
Displacement: 151.5 tonnes
Sail area: 1134.3 m2